QNAP QDA-A2AR 2.5" to 3.5" SATA Drive Adapter

2,590.-
est. delivery in 30-60 days
Key Specifications
  • Fit Two 2.5" Drives in One 3.5" Bay

  • Supports SATA III and RAID

  • No Software or Drivers Needed

  • Windows, Linux, or QNAP NAS Compatible

SKU:#053464 Warranty1 year by QNAP Product No.:QDA-A2AR Short link:http://i.nvade.it/dUk See specifications from the manufacturer


Use two 2.5-inch SATA drives in a single 3.5-inch SATA drive bay with RAID support for PC and NAS The QDA-A2AR can accommodate two 2.5-inch SATA drives within a single 3.5-inch SATA drive bay. No software driver is required for the QDA-A2AR, and it can be installed in a PC/workstation (Windows, Linux) or QNAP NAS to flexibly add additional hard drives or SSDs to meet various storage needs. Supports various RAID levels The QDA-A2AR supports a variety of RAID configurations. Depending on your requirements, you can use the bundled metal pin as disk mode switch tool to select your ideal RAID mode: Individual, JBOD, RAID 0, or RAID 1. Windows users can use the QNAP External RAID Manager utility to view the RAID group status and disk health information. Individual Mode A PC that supports SATA port multipliers can connect two SATA drives to a single SATA port, allowing you to independently access each disk as separate storage space. RAID 1 Mode (Default) Half of the total storage capacity is used to store data, and the other half keeps a copy of this data. This provides high data protection at the cost of only being able to use half the installed storage space. RAID 0 Mode Data is split amongst the drives. RAID 0 provides the fastest performance but does not protect data from drive failure. JBOD Mode All the drives are recognized as a single drive. This allows maximal storage utilization but provides no data protection. Install in a PC/workstation for higher performance or data protection When using two 2.5-inch drives instead of a single 3.5-inch drive in a PC/workstation (Windows or Linux) you can create a RAID 0 for enhanced performance, or RAID 1 to add data redundancy for greater data protection. To deal with tasks that require intensive, fast data transmission, you can install high-speed SATA SSDs to achieve maximized performance and lower latency, ideal for on-the-fly video editing and server-grade applications. External RAID Manager for Windows users The QNAP External RAID Manager utility allows Windows users to view the drive status and RAID information of the QDA-A2AR. Firmware updates for the QDA-A2AR can also be managed with the External RAID Manager utility. Install in QNAP NAS for efficient storage or SSD caching The QDA-A2AR supports hardware RAID that will not consume CPU resources to help sustain optimal NAS performance. You can install one or more QDA-A2AR in a NAS to maximize the storage utilization of 3.5-inch drive bays. The QDA-A2AR can accommodate two SSDs to create an SSD volume for performance-demanding workflows or work in an efficient tiered-storage environment with Qtier. It can also boost IOPS performance when configuring SSD caching. RAID information and drive health of the QDA-A2AR can be monitored through the QTS Storage & Snapshots Manager.

Warranty

Warranty
1 year by QNAP

Storage

Storage drive size2.5"
Supported storage drive interfacesSerial ATA III
Number of storage drives supported2
Supported storage drive heights7,9.5 mm
RAID levels0,1,JBOD

Ports & interfaces

USB connectivityN

Design

Product typeHDD/SSD enclosure
Product colourBlack

Performance

Data transfer rate6 Gbit/s

System requirements

Windows operating systems supportedWindows 7
Linux operating systems supportedY

Packaging content

Screws includedY