Narrow choices Reset
123»
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Standard Rigid Resin Plus
    • Molding surface hardness: 85-90D
    • Density: 1.14g/cm3
    • Tensile strength: 60-68Mpa
    • Viscosity: 300-400cps
    • Bending strength: 90-95Mpa
    • Molding shrinkage: 3.5%-4.2%
    • Heat deflection temperature: 85 °C
    • Elongation at break: 9-12%
    • Cost-effective
    • High precision
    • Low shrinkage
    • Short curing time
    • Wide compatibility
    • High strength
    • High toughness
    • Smooth surface
    974.-
    See more
    est. delivery in 2-4 days
  •  
    • Standard Rigid Resin Plus
    • Molding surface hardness: 85-90D
    • Density: 1.14g/cm3
    • Tensile strength: 60-68Mpa
    • Viscosity: 300-400cps
    • Bending strength: 90-95Mpa
    • Molding shrinkage: 3.5%-4.2%
    • Heat deflection temperature: 85 °C
    • Elongation at break: 9-12%
    • Cost-effective
    • High precision
    • Low shrinkage
    • Short curing time
    • Wide compatibility
    • High strength
    • High toughness
    • Smooth surface
    974.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    581.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • LCD Water Washable Resin Plus
    • Density: 1.05-1.15g/cubic cm
    • Bending strength: 45-75Mpa
    • Viscosity: 150-250cps
    • Molding hardness: 78-79D
    • Elongation at break: 10-14%
    • Tensile strength: 30-46Mpa
    • Heat distortion temperature: 62 °C
    • Model washable
    • Low viscosity
    • Low odor
    • Cost-effective
    • High precision
    • Smooth finish
    • Wide compatibility
    767.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Low Odor Resin
    • Molding surface hardness: 85-88D
    • Absorption band: 405nm
    • Viscosity: 150-250MPaㆍs
    • Shrinkage: 3.62-4.24%
    • Printing speed: 2-18 s/layer
    • High-cost performance
    • Low odor
    • Smooth finish
    • High precision
    • Good fluidity
    • Short curing time
    • Wide compatibility
    1,107.-
    See more
    est. delivery in 2-4 days
  •  
    • Standard Rigid Resin Plus
    • Molding surface hardness: 85-90D
    • Density: 1.14g/cm3
    • Tensile strength: 60-68Mpa
    • Viscosity: 300-400cps
    • Bending strength: 90-95Mpa
    • Molding shrinkage: 3.5%-4.2%
    • Heat deflection temperature: 85 °C
    • Elongation at break: 9-12%
    • Cost-effective
    • High precision
    • Low shrinkage
    • Short curing time
    • Wide compatibility
    • High strength
    • High toughness
    • Smooth surface
    974.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 300x300x400mm
    • Layer Height 0.1mm-0.4mm
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/PETG
    • 4.3 Inch Color Touchscreen
    18,190.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 400x400x400mm
    • Layer thickness 0.1mm-0.4mm
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/TPU/PETG/Wood
    • 4.3 Inch Color Touchscreen
    29,490.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 500x500x500mm
    • Print Speed Normal 60mm/s. Max 100mm/s
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/Wood
    27,990.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 300x300x400mm
    • Layer Height 0.1mm-0.35mm
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/PETG/Wood
    • 4.3-inch HD full viewing angle screen
    • Touch Screen: Capacitive multi-touch screen
    • Camera: Al Camera
    • Print Medium: SD Card/Wi-Fi/Network
    • Network Connection: Wi-Fi/Bluetooth/RJ45
    27,790.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 250x250x400mm
    • Supported Filaments: PLA, TPU, Wood, Carbon Fiber
    • Layer height 0.1mm-0.4mm
    • Touch screen 4.3 inch
    23,990.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 350x350x400mm
    • Filament Diameter: 1.75mm
    • Supported Filaments: PLA, ABS, Soft Glue, Wooden, Copper Containing, Gradient
    21,990.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 235x235x250mm
    • Layer thickness 0.1mm-0.4mm
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/PETG
    • 4.3 Inch Color Touchscreen
    14,790.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 300x225x380mm
    • Layer thickness 0.1mm-0.3mm
    • Filament diameter 1.75mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS
    • Nozzle temperature: 300 degree C
    • 4.3 Inch Touchscreen
    45,790.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 175x175x165mm
    • Print Speed 50-150mm/s
    • Filament diameter 1.75mm
    • Layer Thickness: 0.1-0.4mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/PETG
    • 4.3" Color Touch Screen
    • Wi-Fi Connectivity
    • Quick-Disassembly Nozzle
    • 1080P Built-in Camera
    • Intelligent Door Pause When Door is Open
    17,290.-
    See more
    est. delivery in 2-4 days
  •  
    • FDM Fused Deposition Molding
    • Printing Size: 175x175x165mm
    • Print Speed 50-150mm/s
    • Filament diameter 1.75mm
    • Layer Thickness: 0.1-0.4mm
    • Nozzle diameter standard 0.4mm
    • Filament: PLA/ABS/TPU/PETG
    • 4.3" Color Touch Screen
    • Wi-Fi Connectivity
    • Quick-Disassembly Nozzle
    16,190.-
    See more
    est. delivery in 2-4 days
123»