Kingston 4GB DDR3 1333MHz CL9 DIMM (1x4GB) (KVR13N9S8/4)

740.- 890.-
In stock - est. delivery in 1-2 days
Key Specifications
  • DDR3 / 1333MHz / PC3-10600

  • 4GB (1x4GB) / CL9

SKU:#014512 Product No.:KVR13N9S8/4 Short link:http://i.nvade.it/3M4 See specifications from the manufacturer

Improve performance

If your system is lagging or a program doesn’t respond or won’t load, you may have a memory shortage. You may see subtle signs, like poor performance in everyday tasks, or you may be receiving “out of memory” messages.

Add reliable Kingston memory and watch your productivity soar. Pages may load faster and launching new applications may be easier and faster, leaving you more time for that important project.

Build your own PC

Thinking of building your own rig? It’s a great way to get exactly what you want in a system.

Before you start, consider your motherboard’s technology. Is it DDR3 or DDR4? How many slots are available for memory? Does it have to be installed in pairs, triplets or quads? At what speed do you want your memory to perform?

By answering these questions, you’ll have a better idea of what you need and what Kingston memory will work best in your system.

Replace your memory

In case your memory fails, rest assured that Kingston can deliver what you need to get back up and running.

If you’re using a brand-name system or you know the name of your whitebox system’s motherboard, use our configurator to find the right module.

If you know the specs of the memory in your whitebox system, our product selection tool is for you. Finding the memory you need is easy with Kingston.

Lifetime Warranty

All Kingston memory is backed by a lifetime warranty.

Free Technical Support

Kingston experts are standing by to share their knowledge and help you in the unlikely event that you have any problems with Kingston memory.

Testing

Kingston is one of the few manufacturers that qualifies all components and tests modules at all stages of production.


This document describes ValueRAM's 512M x 64-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 1Rx8 memory module, based on eight 512M x 8-bit DDR3-1333 FBGA compo- nents. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifica- tions are as follows:

- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration: Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Features

Internal memory4 GB
Memory layout (modules x size)1 x 4 GB
Internal memory typeDDR3
Memory clock speed1333 MHz
Component forPC/server
Memory form factor240-pin DIMM
Buffered memory typeUnregistered (unbuffered)
ECCN
CAS latency9
Memory bus64 bit
Memory ranking1
Memory voltage1.5 V
Module configuration512M x 64
Row cycle time49.125 ns
Refresh row cycle time260 ns
Row active time36 ns
SPD profileY
Product colourGreen
Lead platingGold

Operational conditions

Operating temperature (T-T)0 - 85 °C
Storage temperature (T-T)-55 - 100 °C

Weight & dimensions

Width133.3 mm
Height30 mm